How To Install Wire Mesh Fence?

December 12, 2022

How To Install Wire Mesh Fence?

Coil type wire mesh fence installation generally requires 2-3 people, a special pliers, a number of buckle (Dutch net post accessories). This type of coil wire fence is widely used.

First, bury the wire fence posts about 0.5 meters into the ground. If you want to make the posts stronger, you can pour cement. If it is only temporary protection, it can be tamped down after embedding the column. The fence is then unrolled and special calipers are used to connect the posts to the net.

Galvanized Power Coated China Manufacture Green Wire Mesh Fence4

Installation points:
First, the buckle must be stuck at the intersection of the net, and the pliers are stuck dead;
Two, it is best to install more than one column at the corner and try to avoid the right Angle corner.
Three, heavy cargo transportation process or installation process is prone to wear, the product will appear skin plastic wear, long time easy to rust, the best use after installation since spray paint repair!
1, professional installation tools, calipers.
2. Special supporting columns, as well as the required accessories, rain caps and so on.
3. Dig 40cm x40cm x50cm foundation pit on the ground before installation, with an interval of 3 meters.
4. Use cement to pour the vertical column, and then spread the fence net, and use the caliper to fasten the net wire and the column.

5, if there are special requirements every 30 meters can be set up a broken column and a group of longitudinal diagonal brace force reinforcement.

Welded Wire Mesh Fence Galvanized Anti Climb Fence Panel Malaysia3